SERVICE PROGRAM MODE TABLES
SM 5-91 B064 Series/B140 Series/G126
Service
Tables
5850* Address Book Function (B064 only)
001 Switch Module Selects the module for managing user information.
[0~1/1]
0: SCS
1: UCS
002 Select Title Selects the default heading of the address book.
[2~4/1]
2: Heading 1
3: Heading 2
4: Heading 3
5852 SMTP (B064 only)
Simple Mail Transfer Protocol. The protocol for communication between Internet
main MTAs (Message Transfer Agents).
001
Server
Name
Sets the server name.
002 Port Number Sets the port number
5853 Stamp Data Download
Push [Execute] to download the fixed stamp data from the machine ROM onto the
hard disk. Then these stamps can be used by the system. If this is not done, the
user will not have access to the fixed stamps (“Confidential”, “Secret”, etc.).
You must always execute this SP after replacing the HDD or after formatting the
HDD. Always switch the machine off and on after executing this SP.
5856 Remote ROM Update
When set to “1” allows reception of firmware data via the local port (IEEE 1284)
during a remote ROM update. This setting is reset to zero after the machine is
cycled off and on. Allows the technician to upgrade the firmware using a parallel
cable
[0~1/1]
0: Not allowed
1: Allowed
To Next Page
Loading...
