JOGGER FENCE ADJUSTMENT
SM 21 B468/B469/B674
3000-Sheet
Finisher
B468/B469/
B674
16. Use SP6902 (Fold Position Adjustment) until the two edges intersect in the
middle at [A]. This minimizes vertical fold skewing by bringing the leading and
trailing edges of the sheets closer together.
NOTE: B140 copiers: First adjust SP 6902. Then if the same problem occurs
when single sheets are folded, adjust SP 6903. See the SP tables in
the B140 service manual for how to use SP 6903.
17. Repeat Step 15. If , , , or is still more than 2 mm, go to Step 18.
NOTE: Although the fences may be parallel and within range of the distance
from the paper edges (0 to 0.5 mm), they may not be perpendicular to
the folding mechanism. Step 14 corrects this.
B468R914.WMF
[A]
To Next Page
Loading...
