Connecting the Printer
122
IEEE 1394 Connection
❒ Use the 1394 interface cable provided with the 1394 interface unit.
❒ You cannot plug devices together to create loops.
❒ Do not use a cable more than 4.5 meters (14.8 feet) long.
A Connect the interface cable to the IEEE 1394 interface board.
B Connect the other end to the host computer.
❒ You can use either connector.
❒ Either of the two connectors for the 1394 interface unit can be used.
❒ If you have an interface cable with a ferrite core, connect the ferrite core
end to the printer.
For details about settings for IEEE 1394(IP over 1394, SCSI print) connec-
tion printing, see Software Guide.
To Next Page
Loading...
Need help?
General
