Poor Printing
105
4
Dirt on the Front Side of Paper (Black Line/Stain)
Note
❒ If there is no margin or if there is a solid image area near the leading edge of
the original, make a margin of at least 5mm, 0.2" at the leading edge. Other-
wise, the paper exit pawl might become dirty and cause black lines on prints.
❒ Check the exposure glass cover and clean it if dirty. See p.124 “Maintaining
the Machine”.
❒ Check the exposure glass and clean it if dirty. See p.124 “Maintaining the Ma-
chine”.
❒ When black lines or stains still appear on prints even if you clean the above,
contact your service representative.
GRBLAC1E
To Next Page
Loading...
