Printing Functions
48
3
Erase Border
This function erases all four margins
of the original or paper.
Note
❒ You can specify within a range of 0
to 20mm, 0" to 0.8", the width of
the margin to be erased. See “Erase
Border Width” on p.112 “4 Initial
Settings”.
❒ The default is 5 mm, 0.2".
A Set your original.
B Press the {Erase Border} key.
C Use the {U}{T}keys to select the
original size and orientation, and
then press the {OK} key.
D Enter the number of prints with
the number keys.
E Press the {Start} key.
Auto Delete Margin Shadow
If the exposure glass or ADF is open
during scanning, and Erase Border is
not selected, dark areas surrounding
the original might appear as a shad-
ow on the prints.
The Auto Delete Margin Shadow
function automatically detects there
areas and prevents them appearing
on the prints.
ACY068S
BFU006S
ANT008S
ANT015S
To Next Page
Loading...
