Ricoh DX 3243 - Printing on Thick or Thin Paper; Feed Roller Pressure Lever Position

Printing on Thick or Thin Paper
35
2
Printing on Thick or Thin Paper
When you make prints on thick (127.9
to 209.3 g/m
2
, 34.0 to 55.6 lb), stand-
ard (52.3 to 127.9 g/m
2
, 13.9 to 34.0 lb)
or thin (47.1 to 52.3 g/m
2
, 12.5 to 13.9
lb) paper, perform the following
steps.
Note
❒ Reduce the print speed when
printing on thick or thin paper.
Feed Roller Pressure Lever
Position
A Shift the feed roller pressure le-
ver to the Thick, Standard, or
Thin paper position.
Note
❒ Shift the lever according to the
paper weights as shown in the
following table.
*1
When paper is smaller than B5,
5
1
/
2
" × 8
1
/
2
" and heavier than
81.4 g/m
2
(21.6 lb.), move the
feed roller pressure lever to the
Thin paper position.
B Shift the paper feed side plates
lock lever forward. Adjust the
side plates to match the paper
size.
1: Paper Feed Side Plates Lock Lever
ANT075S
Metric
version
Inch
version
Thick 127.9–209.3
g/m
2
34.0–55.6 lb.
Stand-
ard
52.3–127.9
g/m
2
13.9–34.0 lb.
Thin
*1
47.1–52.3
g/m
2
12.5–13.9 lb.
1
ANT072S