Printing Functions
52
3
Memory Mode (print per original)
Normal Memory Mode
Note
❒ You can make prints from up to 30
originals at one time.
A Set your original.
B Press the {Memory/Class} key.
C Use the {U}{T} keys to select
Memory, and then press the {OK}
key.
D With the number keys, enter the
desired number of prints for each
original, and then press the {q}
key.
Note
❒ Repeat this step until you have
entered for all the originals.
E Press the {OK} key.
F If you are using the optional tape
dispenser, turn on the tape dis-
penser switch.
Note
❒ The optional tape dispenser au-
tomatically feeds out strips of
paper to separate the prints
made from each original.
G Press the {Start} key.
ANT026S
TSLP013E
On
Off
ANT015S