Ricoh DX 3243 - Class Mode (Print Per Class)

Printing Functions
51
3
Class Mode (print per class)
Note
❒ You can print for up to 24 combi-
nations of number of prints and
number of classes.
❒ The maximum possible number of
classes in one combination is 99.
A Set your original.
B Press the {Memory/Class} key.
C Use the {U}{T} keys to select
Class and then press {OK} key.
D With the number keys, enter the
desired number of prints, and the
press the {q} key.
E With the number keys, enter the
desired number of classes, and
then press the {q} key.
Note
❒ Repeat Steps
D
to
E
as desired.
F Press the {OK} key.
G If you are using the optional tape
dispenser, turn on the tape dis-
penser switch.
Note
❒ The optional tape dispenser au-
tomatically feeds out strips of
paper to separate each group of
prints.
H Press the {Start} key.
ANT026S
TSLP013E
On
Off
ANT015S