Printing Functions
66
3
Hold Data-in
You can select whether or not the ma-
chine automatically switches to On-
line mode when it receives data from
a PC.
Press the {Hold Data-in} key to switch
it on or off.
When the Hold Data-in mode is off,
the machine gives priority to data re-
ceived from a PC. If you are making
prints and do not wish to have your
print job interrupted by a PC, press
the {Hold Data-in} key to turn it on.
Note
❒ The default is Off.
A Press the {Hold Data-in} key.
BFU007S
To Next Page
Loading...
