User Tools Menu
115
5
7 Online Settings
Limitation
❒ The optional printer controller is required for these settings.
❒ The displayed Online Settings menus depend on the type of printer controller.
No. Mode Description
1 Hold Data-in You can select to have Hold Data-in mode either “On” or “Off”
when the power is turned on, or after mode settings have been
cleared.
Note
❒ Default: Off
2 List/Test Print Allows you to print the system controller's configuration data.
3 DHCP (Auto-Ob-
tain)
Select either "On" or "Off" for DHCP. If you select "On", the ma-
chine obtains its IP address automatically by DHCP. If you se-
lect "Off", a static IP address must be manually specified as the
machine's IP address.
Note
❒ Default: On
4 IP Address If you have selected "Off" for the DHCP setting, you must spec-
ify a static IP address for the machine here.
Note
❒ Default: 11.22.33.44
5 Subnet Mask If you have selected "Off" for the DHCP setting, you must spec-
ify a subnet mask for the machine here.
Note
❒ Default: 0.0.0.0
6 Gateway Address If you have selected "Off" for the DHCP setting, you must spec-
ify a gateway address for the machine here.
(A gateway is a connection or interchange point between two
networks.)
Note
❒ Default: 0.0.0.0
7 Ethernet Speed Allows you to specify the network access speed.
Note
❒ Default: Auto Select
To Next Page
Loading...
