User Tools
116
5
8 I/O Timeout Allows you to specify how many seconds the machine waits be-
fore it cancels a stalled print job.
Note that if job data from other ports often arrives while earlier
print jobs are in progress, specifying a longer timeout period
will prevent the machine cancelling the earlier jobs.
Note
❒ Default: 15Sec.
9 I/O Buffer Allows you to specify the size of the I/O Buffer. Normally it is
not necessary to change this setting.
Note
❒ Default: 128KB
10 Restore Defaults Allows you to reset changed settings back to their factory-set
default values.
Note that the following settings do not change:
•DHCP
•IP Address
• Subnet Mask
• Gateway Address
• Ethernet Speed
To Next Page
Loading...
