Printing on Thick or Thin Paper
37
2
Separation Pressure Lever
Position
A To prevent double feed, adjust
the paper separation pressure us-
ing the separation pressure lever.
Note
❒ Paper separation pressure can
be adjusted according to the pa-
per weights as shown in the fol-
lowing table.
*1
This position can also be used if
the leading edge of the paper is
curled, or when the paper does
not feed properly.
Position Metric
version
Inch
version
1 Use this position if the
leading edge of the pa-
per is curled, or when
the paper does not feed
properly at Position 2.
2
*1
81.6–209.4
g/m
2
21.7–55.6
lb.
3 47.1–81.5
g/m
2
12.6–21.6
lb.
ANT117S
To Next Page
Loading...
