Master Roll Replacement
81
4
Master Roll Replacement
The Master End indicator (C ) is lit
when it is time to replace the master
roll.
A Pull out the master tray.
B Press the release button to open
the master feeding cover.
C Unwrap the tape from the new mas-
ter roll.
D Remove the used master roll and
pull out both spools. Then, insert
both spools into a new master
roll.
Note
❒ It is necessary to replace the mas-
ter roll even if some master re-
mains on the old roll.
E Set the new master roll in the mas-
ter tray.
ANT065S
ZJVH070E
TSLT010E
ZFRH260E
To Next Page
Loading...
