Ricoh DX 3243 - Changing the Paper Size

Troubleshooting
76
4
Changing the Paper Size
A Remove the paper from the paper
feed tray.
The paper feed tray will lower.
B Shift the paper feed side plates
lock lever forward. Adjust the pa-
per feed side plates to match the
paper size.
1: Paper Feed Side Plates Lock Lever
C Load paper into the paper feed
tray.
Note
❒ Correct any paper curl before
setting the paper.
❒ Make sure that the side plates
touch the paper lightly.
❒ Shift the lock lever to its original
position.
D Adjust the side plates and the end
plate.
ANT073S
1
ANT072S
ANT074S
2
1
2
ANT062S