Printing Functions
63
3
C Use the {U}{T}keys to select Re-
peat 2, and then press the {OK}
key.
D Use the {U}{T} keys to select
original and paper size, and then
press the {OK} key.
E Press the {Start} key.
Skip Feed / A3 Paper Feed
Skip Feed
If the backs of prints are dirty, you
can use the Skip Feed function to
make the drum rotate twice instead of
once with every sheet of paper fed.
This gives you time to remove prints
one by one from the paper delivery
tray, or to insert a sheet of paper be-
tween two prints.
Note
❒ You can specify how many times
that the drum rotates when the
power is turned on. Alternatively,
you can also choose whether or not
to change the number of rotations
temporarily when the {Skip Feed/A3
Paper Feed} key is pressed. See
“Skip Feed” on p.113 “5 Mode Set-
tings”.
❒ The number of rotations can be set
from 2 to 9.
❒ The default is 2.
A Press the {Skip Feed/A3 Paper Feed}
key.
ANT015S
BFU001S
To Next Page
Loading...
