Printing Functions
64
3
B Use the {U}{T}keys to select Skip
Feed, and then press the {OK} key.
C Press the {Start} key.
A3 Paper Feed
This machine can print on A3 size pa-
per.
Note
❒ Although printing on A3L size
paper is possible, the maximum
possible size of the printed image
is as follows:
• Type 1 (A4 drum) model: 210 ×
288 mm
• Type 2 (B4 drum) model: 250 ×
355 mm
❒ If you print A3L size originals on
A3L paper at 100% magnification,
areas of the printed image will be
missing.
❒ The horizontal (upper and lower)
image position are fixed at -20 mm
(Type 1: A4 drum) / -10 mm (Type
2: B4 drum). The vertical (left and
right) print margins can each be
adjusted by approximately 1 mm.
❒ Print speed is limited to 80 cpm.
❒ The following paper weights are
available for A3 Paper Feed.
• Type 1 (A4 drum) model: 52.3
g/m
2
and 81.4 g/m
2
• Type 2 (B4 drum) model: 52.3
g/m
2
and 157 g/m
2
❒ The A3L output tray can store up
to 500 sheets of 64 g/m
2
(20 lb) pa-
per.
❒ To load A3L size paper, the Side
pads and Side plate guides must
first be removed.
❒ Skip Feed Printing is not possible
when printing on A3L size paper
❒ A3 Paper Feed cannot be regis-
tered to Memory mode.
❒ When the Hold Data-in mode is off,
the A3 Paper Feed function cannot
be used. When using the A3 Paper
Feed function for online printing,
set Hold Data-in mode to on after
Master Making, and then specify
A3 Paper Feed to print.
A Press the {Skip Feed/A3 Paper Feed}
key.
B Use the {U}{T}keys to select A3
Paper Feed, and then press the
{OK} key.
ANT015S
BFU001S
To Next Page
Loading...
