Printing Functions
53
3
Stack Memory Mode
Limitation
❒ To use Stack Memory mode, you
need to first set Memory Mode to
“Stack Mode” using the user tools.
See “Memory Mode Setting” on
p.113 “5 Mode Settings”.
Note
❒ You can make prints for up to 30
classes at one time.
A Set your original.
B Press the {Memory/Class} key.
C Use the {U}{T} keys to select
Memory, and then press the {OK}
key.
D With the number keys, enter the
desired number of prints for each
class, and then press the {q} key.
Note
❒ Repeat this step until you have
entered for all of your classes.
E Press the {OK} key.
F If you are using the optional tape
dispenser, turn on the tape dis-
penser switch.
G Press the {Start} key.
ANT026S
ANT015S
To Next Page
Loading...
