Ricoh FT4018 - Setting One Original at a Time

Setting One Original At A Time
You can insert one original at a time into the document feeder. The original
is automatically fed onto and removed from the exposure glass.
1
.
Correct any curl, fold, or crease
in the originals before setting.
2
.
Confirm that the Insert Original
indicator is lit before setting the
originals.
3
.
Confirm that no previous originals
remain on the exposure glass.
4
.
Adjust the guides to the original
size.
5
.
Set the original face up into the
document feeder until the Insert
Original indicator goes off.
❐ If you are copying a stack of originals
one sheet at a time and you want to
keep them in order, start with the last
page of the originals.
❐ The original guides must touch both
sides of the original.
6
Press the Start key.
gkf-ueg5
SETTING ORIGINALS IN THE OPTIONAL DOCUMENT FEEDER
24