Copying From The Bypass Feed Table
Use the bypass feed table to copy onto paper that is not set the paper tray.
❐
OHP transparencies, adhesive labels, post cards, and translucent paper can be
set into the bypass tray.
❐
Regarding the paper sizes and directions that can be set,
☛
see page 16
❐
Number of sheets that can be set at one time:
Standard paper: 80sheets(80 g/m2, 20 lb.)
OHP transparencies: 10sheets
Adhesive labels: 1 sheet
Translucent paper: 1sheet
Post card: 1sheet
❐
OHP transparencies and translucent paper should be fanned to get between
the sheets before loading.
❐
Regarding functions that cannot be used together with this function,
☛
see
page 42.
1
Set your original on the exposure
glass or in the optional document
feeder. ☛ See page 21 or 22.
2
Open the bypass feed table.
gkf-ueg-6
BASIC FUNCTIONS
31
To Next Page
Loading...
