Ricoh FT4018 - Basic Functions; Adjusting Copy Image Density

BASIC FUNCTIONS
Adjusting Copy Image Density
To match the type of originals, adjust the image density.
Auto image density
If the Auto Image Density indi-
cator is lit, the copier automat-
ically controls the image density.
If the indicator is not lit, press the
Auto Image Density key.
Manual image density
If you require darker or lighter
copies, adjust the image density
yourself.
Press the Lighter (left) key to
lower the image density. Press
the Darker (right) key to increase
the image density.
gkf-ueg-6
Lighter Darker
Auto
Image Density
Lighter Darker
Auto
Image Density
BASIC FUNCTIONS
30