ADDING TONER
When the Add Toner
f
indicator blinks, it is time to supply toner (copying
is still possible). When the Add Toner
f
indicator is continuously on,
copies cannot be made until the toner cartridge is replaced.
$
WARNING:
Do not incinerate the used toner containers. Toner dust might ignite
when exposed to open flames. Dispose of the used toner cartridge
according to local regulations for plastics.
$
CAUTION:
•• This copier has been tested for safety using this supplier’s parts and
consumable. We recommend you only use these specified supplies.
•• Do not eat or swallow toner
•• Keep toner or toner containers out of reach of children.
NOTE: Before setting the new toner cartridge, shake it well at least 5 or 6 times.
NOTE:
If
f
indicator is still lit after adding toner, turn the main switch off
and on again.
NOTE:
Don not remove the toner bottle before the Add Toner
f
indicator
comes on - toner could spill out .
1
Open the copier’s front cover.
2
You can find the sticker explain-
ing how to add toner inside the
front cover, as shown in the illus-
tration.
3
Load the new toner cartridge fol-
lowing the instructions on the
sticker.
gkf-ueg7
ADDING TONER
50
To Next Page
Loading...
