CLEARING MISFEEDS
CAUTION:
When removing misfed paper ,do not touch the fus-
ing section because it could be very hot.
NOTE: Since some parts of the copier are supplied with high electrical volt-
age, touch only the parts specified in the instructions on the sticker
inside the machine’s cover.
NOTE:
Do not leave any torn scraps of paper within the machine.
NOTE: When clearing misfeeds, do not turn off the main switch. If you do,
your copy settings are cleared.
NOTE: After clearing misfeeds, make sure that all units and levers are re-
turned to their original positions and all covers are closed.
NOTE: Do not touch originals in the optional document feeder when a pa-
per misfeed occurs in the copier. If you do, the copier cannot know
which originals have been copied, and which should be copied.
NOTE: If a paper misfeed occurs when paper is fed from the tray, do not
pull out the tray before clearing misfeeds.
Check The Misfeed Location Display
The display shows the location of
misfed paper.
gkf-ueg7
/
2
14
Check
Paper Size
Tray
Wait
Ready
$
CLEARING MISFEEDS
51
To Next Page
Loading...
Need help?
General
