LOADING PAPER
NOTE: Regarding paper sizes that can be set,
☛
see page 16.
NOTE: If you want to change the paper size,
☛
see page 56
.
NOTE: For details about non-recommended copy paper and notes for copy
paper,
☛
see page 16
.
Non-recommended Paper For Paper Tray
❐
Folded, curled, creased, or damaged paper
❐
Torn paper
❐
Perforated paper
❐
Paper with conductive or low electrical resistance coating such as carbon or
silver coating
❐
Thermal paper, art paper
❐
Thin paper that has low stiffness
Notes For Paper
❐
Load paper with the copy side
down
in the tray, and with the copy side
up
in
the bypass feed table. If copies are curled, try turning the copy paper over in
the tray. If there is no improvement, change to copy paper with less curl.
❐
Correct curls in copy paper before loading.
❐
Fan copy paper to get air between the sheets before loading.
❐
When making two-sided copies, do not load paper in the paper tray for copying
the reverse side. Use the the bypass feed table.
gkf-ueg7
LOADING PAPER
47
To Next Page
Loading...
