Copier’s condition Action
Check Paper Size indicator
is lit.
You cannot use the bypass feed table in the Sort or
Stack mode.
➠
Select the paper tray.
The indicator of the Auto Image
Density indicator blinks.
Turn the main switch off and on. If this condition re-
occurs, call your service representative and explain the
problem.
The Manual Image Density
indicator blinks.
Misfeeds occur frequently.
Is the right kind of paper in the paper tray?
➠
Paper size and weight must be within the
specifications for this copier.
Is folded, wrinkled, damp, or curled paper in the paper
tray?
➠
Always use dry, undamaged paper.
Is the paper properly set in the tray?
➠
Always load paper correctly.
Are there any pieces of misfed paper or other materials
in the machine?
➠
Make sure that the paper path is completely
cleared of paper and other material after a misfeed.
❐
If you cannot correct the problem by taking the above actions, please contact
your service representative.
gkf-ueg7
IF YOUR COPIER DOES NOT OPERATE AS YOU WANT
45
To Next Page
Loading...
