Ricoh FT4018 - Page 64

3 . Auto Reset Time Set
As a default setting, the copier can reset itself 1 minute after the final copy
is made or after the last time any key is pressed. If a 1 minute reset time is
not appropriate, you can change this time or cancel this function.
❐
For how to change settings,
☛
see page 59.
Default: 1 minute (Setting: 0)
Setting Definition
01 minute
13 minutes
2 Auto reset is turned off.
4 . Auto Energy Saver Set
As a default setting, when the copier is reset by the auto reset, the Energy
Saver is automatically set. You can change this setting.
❐
For how to change settings,
☛
see page 59.
Default: Yes (Auto energy saver is set.) (Setting: 1)
Setting Modes
0 No (Auto energy saver is not set.)
1 Yes (Auto energy saver is set.)
5.Auto Off
You can set the copier to turn off after the selected time to conserve
energy.
❐
For how to change settings,
☛
see page 59.
❐
For details about Auto Off made, contact your service representative.
Default: 30 minutes (Setting: 0)
Setting Definition
0 30 minutes
1 15 minutes
2 60 minutes
3 90 minutes
4120 minutes
5240 minutes
gkf-ueg8
USER TOOLS
61