Ricoh GelSprinter GX e2600 - Specifying System Settings using the Control Panel (System Menu)

2. Press the [ ] or [ ] key to display [Maintenance], and then press the [#Enter] key.
Menu:
Maintenance
3. Press the [ ] or [ ] key to display [Date/Time], and then press the [#Enter] key.
Maintenance:
Date/Time
4. Press the [ ] or [ ] key to display [Time Zone], and then press the [#Enter] key.
Date/Time:
Time Zone
5. Press the [ ] or [ ] key to set the time zone, and then press the [#Enter] key.
Time Zone:
GMT+09:00
6. Press the [Online] key.
The initial screen appears.
De-condensation
If the "ERR (993) Power Off On / Call Service if error reoccurs" message appears, there might be
condensation inside the printer. You can dry the printer's interior by performing the de-condensation
procedure.
1. Press the [Menu] key.
BYJ127S
2. Press the [ ] or [ ] key to display [Maintenance], and then press the [#Enter] key.
Menu:
Maintenance
6. Maintaining
180
6