Ricoh GelSprinter GX e2600 - Selecting the Control Panel Language

Selecting the Control Panel Language
This
section explains how to select the language used for the settings and messages displayed on the control
panel.
1. Press the [Menu] key.
BUG127S
2. Press the [ ] or [ ] key to display [Language], and then press the [#Enter] key.
Menu:
Language
3. Press the [ ] or [ ] key to select the language, and then press the [#Enter] key.
Language:
*English
The message "Power Off On to Change Setting" appears.
4. Switch the printer off and back on.
BUG118S
Use the following procedure to change the language setting.
1. Press the [Online] key.
The initial screen appears.
2. Press the [Menu] key.
Selecting the Control Panel Language
187
6