Ricoh GelSprinter GX e2600 - Paper Size Mismatch;Paper Type Mismatch (Tray 1)

1. Press the [Job Reset] key.
BYJ134S
2. Press the [#Enter] key.
BYJ161S
3. Press the [#Enter] key.
No Paper/Tray Not Detected (Bypass Tray)
There is no paper in the bypass tray or the paper is not loaded properly. Do one of the following:
•
Loading paper (Press the [#Enter] key).
• Cancel the print job.
• See p.32 "Detaching and Reattaching the Multi Bypass Tray".
Loading Paper
Load paper in the bypass tray, and then press the [#Enter] key to begin printing.
1. Load paper in the bypass tray.
Status Monitor Errors
257
7