Ricoh GelSprinter GX e2600 - Host Interface; Network Setup

2. Press the [Menu] key.
BYJ127S
The Menu screen appears on the display.
3. Press the [ ] or [ ] key to display the [Host Interface] menu, and then press the [#Enter]
key.
Menu:
Host Interface
4. Press the [ ] or [ ] key to display [Network Setup], and then press the [#Enter] key.
Host Interface:
Network Setup
5. Press the [ ] or [ ] key to select [IP Address], and then press [#Enter] key.
Network Setup
IP Address
The current IP address appears on the display.
6. Press
the [
] or [ ] key to enter the left most entry field of the IP address, and then press the
[#Enter] key.
IP Address:
. 0. 0. 0
To get an IP address for the printer, contact your network administrator.
The value moves by 10 if the [ ] or [ ] key is kept pressed.
When the [#Enter] key is pressed, the cursor moves to the next field.
7. Press the [#Enter] key.
As the specified value is entered in each field, the cursor moves to the next field.
IP Address:
192.
. 0. 0
2. Preparing for Printing
60
2