Printing a Configuration Page
After setting up the hardware and before connecting the printer to a computer, make a test print by printing
the configuration page.
Printing
the configuration page as a test print primes the print heads and allows you to check that the printer
is functional.
You can also use the configuration page to check the printer's configuration and system settings.
• The
configuration page is printed on A4 or Letter (8
1
/
2
" × 11") size paper, so load them in the same
paper tray.
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to display [List/Test Print], and then press the [#Enter] key.
Menu:
List/Test Print
3. Press the [ ] or [ ] key to display [Config. Page], and then press the [#Enter] key.
List/Test Print:
Config. Page
2. Preparing for Printing
54
To Next Page
Loading...
