Ricoh GelSprinter GX e2600 - Page 383

6. Load paper with the print side face down but not over the limit mark.
BUG239S
7. Push tray 2/tray 3 gently in until it stops.
BUG223S
Loading Paper into Bypass Tray (optional)
Follow the procedure below to load paper into bypass tray.
A4/Letter size paper is loaded here.
1. Pull the bypass tray extension out all the way.
2. Load paper in the bypass tray with the side to be printed on facing up.
BUG126S
Before loading narrow paper, position the side paper guides according to the paper size.
Setting Up the Hardware
53
2