14. Press the [ ] or [ ] key to select a paper type, and then press the [#Enter] key.
Adjustment:
*Plain Paper
15. Press the [ ] or [ ] key to enter the adjustment values (-4.0 to +4.0) in the [Read Direction]
from step 7, and then press the [#Enter] key.
Read Direction:
(-4, +4) 0.0
16. Press the [ ] or [ ] key to enter the adjustment values (-4.0 to +4.0) in the [Feed Direction]
from step 7, and then press the [#Enter] key.
Feed Direction:
(-4, +4) 0.0
17. Press the [Online] key.
The initial screen appears.
• For Tray 2, Tray 3, and the bypass tray, you can adjust [Read Direction] only.
•
If you select [Glossy Paper] as the paper type for Tray 1, you can adjust [Feed Direction] only.
Setting the Date and Time
Use the following procedure to specify the date, time, and time zone.
Date Setting
1. Press the [Menu] key.
To Next Page
Loading...
