Ricoh GelSprinter GX e2600 - Removing Paper Jammed Around the Guide Board

• Align the paper and reload it in the paper tray. Loading paper over the limit line in the tray may result
in a paper jam.
BPR122S
• p.45 "Loading Paper"
•
p.164 "Nozzle Check"
Removing Paper Jammed around the Guide Board
Follow the procedure below to remove paper that is jammed around the guide board.
The GX e2600 features a rear cover in place of a duplex unit.
• If the bypass tray is attached to the printer, switch the printer off and detach the duplex unit.
1. Pressing the catches on both side of the duplex unit, remove the unit.
Detach the duplex unit completely so you can see the guide board in the recess.
BPR150S
If using the GX e2600, remove the rear cover.
7. Troubleshooting
232
7