Ricoh GelSprinter GX e2600 - Removing Paper Jammed in the Multi Bypass Tray (Optional)

5. Push tray 1 gently in until it stops.
BPR125S
6. Press the [Form Feed] key.
BYJ143S
Printing starts.
Blank paper may be delivered after printing resumes.
• p.232 "Removing Paper Jammed around the Guide Board"
• p.220 "Paper Is Not Fed or Delivered Normally"
Removing Paper Jammed in the Multi Bypass Tray (optional)
Follow the procedure below to remove paper jammed in the bypass tray.
You can feed the jammed paper to output ramp by opening the left cover and turning the paper feed wheel.
Paper Jam
225
7