Ricoh GelSprinter GX e2600 - Removing Paper Jammed in the Multi Bypass Tray (Optional)

3. Attach the rear unit.
BUG242S
Printing starts.
Blank paper may be delivered after printing resumes.
• p.218 "Removing Paper Jammed in Tray 1"
•
p.220 "Removing Paper Jammed in Tray 2/Tray 3 (optional)"
• p.223 "Removing Paper Jammed in the Multi Bypass Tray (optional)"
• p.227 "Removing Paper Jammed under the Top Cover"
• p.230 "Removing Paper Jammed around the Guide Board"
• p.234 "Removing Paper Jammed in the Duplex Unit"
• p.237 "If You Cannot Remove Jammed Paper"
Removing Paper Jammed in the Multi Bypass Tray (optional)
Follow the procedure below to remove paper jammed in the bypass tray.
You
can feed the jammed paper to output ramp by opening the left cover and turning the paper feed wheel.
BUG147S
If turning the paper wheel does not remove the jammed paper, use the following procedure to remove it:
Paper Jam
223
7