Changing the Host Interface Menu
This section gives an example of changing a setting in the Host Interface menu.
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to display [Host Interface], and then press the [#Enter] key.
Menu:
Host Interface
3. Press the [ ] or [ ] key to display [I/O Timeout], and then press the [#Enter] key.
Host Interface:
I/O Timeout
4. Press the [ ] or [ ] key to display [20 seconds], and then press the [#Enter] key.
I/O Timeout:
20 seconds
The [Host Interface] menu appears.
5. Press the [Online] key.
The initial screen appears.
Specifying the Interface and Network Settings using the Printer's Control Panel (Host Interface Menu)
73
To Next Page
Loading...
