Ricoh GelSprinter GX e2600 - Changing the System Menu

Changing the System Menu
This section explains setting Energy Saver mode as an example of how to change a System menu setting.
1. Press the [Menu] key.
BYJ127S
2. Press [ ] or [ ] key to display [System], and then press the [#Enter] key.
Menu:
System
3. Press [ ] or [ ] key to display [Energy Saver], and then press the [#Enter] key.
System:
Energy Saver
4. Press [ ] or [ ] key to select the lead time needed to switch to the Energy Saver mode.
E.Saver Timer:
*5 minutes
5. Press the [#Enter] key.
The [System] screen appears.
6. Press the [Online] key.
The initial screen appears.
Specifying System Settings using the Control Panel (System Menu)
187
6