Ricoh GelSprinter GX e2600 - Printing a Configuration Page

2. Load paper in the bypass tray with the side to be printed on facing up.
BPR126S
Before loading narrow paper, position the side paper guides according to the paper size.
BPR176S
Printing a Configuration Page
After setting up the hardware and before connecting the printer to a computer, make a test print by printing
the configuration page.
Printing
the configuration page as a test print primes the print heads and allows you to check that the printer
is functional.
You can also use the configuration page to check the printer's configuration and system settings.
• The configuration page is printed on A4 or Letter (8
1
/
2
" × 11") size paper, so load them in the same
paper tray.
Setting Up the Hardware
51
2