Ricoh GelSprinter GX e2600 - Loading Paper into Bypass Tray (optional)

7. Squeeze the front end paper guide, and then slide it to meet the edge of the paper.
BPR171S
8. Push tray 1 gently in until it stops.
BPR174S
9. Pull out the output ramp extension.
BPR175S
Loading Paper into Bypass Tray (optional)
Follow the procedure below to load paper into bypass tray.
A4/Letter size paper is loaded here.
1. Pull the bypass tray extension out all the way.
2. Preparing for Printing
50
2