Ricoh GelSprinter GX e2600 - Changing the PCL Menu; Symbol Set

Changing the PCL Menu
This section explains setting the symbol set mode as an example of how to change a PCL menu setting.
1. Press the [Menu] key.
BUG127S
2. Press [ ] or [ ] key to display [PCL Menu], and then press the [#Enter] key.
Menu:
PCL Menu
3. Press [ ] or [ ] key to display [Symbol Set], and then press the [#Enter] key.
PCL Menu:
Symbol Set
4. Press [ ] or [ ] key to display [PC-8], and then press the [#Enter] key.
Symbol Set:
*PC-8
The [PCL Menu] screen appears.
5. Press the [Online] key.
The initial screen appears.
6. Maintaining
186
6