Ricoh GelSprinter GX e2600 - Page 35

3. Detach the bypass tray.
BPR108S
4. Reattach the bypass tray.
BPR109S
5. Pull the bypass tray extension out.
6. Load paper in the bypass tray.
• After attaching the paper feed unit, you must register where to start printing on paper loaded in the
paper feed unit.
• When you attach the bypass tray, take care not to trap the USB cable.
BPR198S
• When you detach and reattach the bypass tray, switch the printer off.
Options
33
1