Ricoh GelSprinter GX e2600 - Page 362

4. Reattach the bypass tray.
BUG109S
5. Pull the bypass tray extension out.
6. Load paper in the bypass tray.
• After attaching the paper feed unit, you must register where to start printing on paper loaded in the
paper feed unit.
•
When you attach the bypass tray, take care not to trap the USB cable.
BUG198S
• When you detach and reattach the bypass tray, switch the printer off.
• For details about registering where to start printing on paper loaded in the paper feed unit, see
p.170 "Registration".
1. Read This First
32
1