Ricoh GelSprinter GX e2600 - Page 418

• Load paper with the paper grain parallel to the feed direction.
• Do not load paper of different types at the same time.
• To load a different type of paper than that already loaded, first remove all currently loaded paper.
• Do not stack paper over the limit mark.
BPR122S
• Curled paper may jam. Straighten any curls within 2 mm (0.08 inches) before loading.
BPR139S
• Before loading envelopes, make sure their edges are sharply creased by rubbing the edges with a
pen or similar object.
BPR165S
Correct Orientation of Pre-printed Paper When Loaded in the Tray 1/Tray 2/Tray 3
Load paper print side down, shorter edge pointing in the paper feed direction.
2. Preparing for Printing
88
2