Ricoh GelSprinter GX e2600 - Page 500

BPR214S
-14
-6
-2
0
+2
+6
0
+2
+6
+14
When horizontal lines beside the lightest gray square are broken, select the optimal adjustment value
by referring to the lines broken in the opposite direction. When the "+2" square is the lightest gray
square
and the "+6" horizontal lines are broken in the opposite direction, the optimal adjustment value
is between "+3" and "+5". After adjustment, check the adjustment result.
-14
-6
-2
0
+2
+6
0
+2
+6
+14
ZKKX040J
7. Press the [ ] or [ ] key to display [Adjustment], and then press the [#Enter] key.
Adj.Paper Feed:
Adjustment
8. Press the [ ] or [ ] key to enter the adjustment value (-14 to +14) from step 5, and then
press the [#Enter] key.
A:
(-14, +14) 0
9. Press the [Online] key.
The initial screen appears.
Registration
Follow the procedure below to adjust where to start printing on paper loaded in each paper tray after
checking the test pattern printed.
6. Maintaining
170
6