Ricoh GelSprinter GX e2600 - Page 566

2. Remove the jammed paper from the rear of the printer.
BUG160S
3. Without pressing the catches on its sides, push the duplex unit all the way in until it clicks
into place.
BUG155S
If the bypass tray has been detached, be sure to switch the power off before reattaching the tray.
• Depending on how the paper was jammed, printing may resume from the next page, not the one
jammed.
• p.31 "Detaching and Reattaching the Multi Bypass Tray"
•
p.218 "Removing Paper Jammed in Tray 1"
• p.220 "Removing Paper Jammed in Tray 2/Tray 3 (optional)"
• p.222 "Removing Paper Jammed in the Rear Unit (optional)"
• p.223 "Removing Paper Jammed in the Multi Bypass Tray (optional)"
• p.227 "Removing Paper Jammed under the Top Cover"
• p.230 "Removing Paper Jammed around the Guide Board"
• p.237 "If You Cannot Remove Jammed Paper"
7. Troubleshooting
236
7