12. The printer's top page appears.
*1
On this page, check that the firmware has been updated.
If the firmware has been updated, a new version number will be displayed.
If the version number has not changed, the update might have failed. In this case, see p. 13,
“If the Update Fails”.
*1 If [DHCP] has been enabled, the printer's IP address might have changed, and the printer's
top page will not appear.
If the printer's top page does not appear, obtain the printer's IP address from the printer's
control
panel, and then connect to that IP address.
- 12 -
To Next Page
Loading...
