You can check the IP address in [Check
Status] "Network". For details about
the ports, see the following:
page308”List of Specifications”
"Connection with
the destination has
failed. Check the
settings. Entered
path name might be
incorrect, or firewall
and security
settings might be
blocking network
connectivity."
The firewall
function is enabled
on the computer.
Enable file and printer sharing in the
firewall function on your computer.
"Exceeded max.
data capacity.
Check resolution
and ratio then press
[Start] again."
The data scanned
by specifying [Scan
Ratio] [Specify
Size] exceeds the
limit.
• Decrease [Send Settings]
[Resolution].
• Specify a smaller paper size in [Send
Settings] [Scan Ratio] [Specify
Size].
"Exceeded max.
data capacity."
"Check the
scanning
resolution, then
press [Start] again."
(A procedure other
than [Start] may be
described in
[Start].)
A large size original
was scanned at a
high resolution, and
the resulting data
size exceeds the
limit.
• Decrease [Send Settings]
[Resolution].
• Specify a smaller size in [Send
Settings] [Scan Size].
"Exceeded max.
email size. Sending
email has been
cancelled. Contact
the administrator
about max. email
size."
The file size per
page has exceeded
the maximum e-
mail size specified
in [Maximum Email
Size].
• Specify a lower value in [Send
Settings] [Resolution], or select a
smaller paper size in [Send Settings]
[Scan Ratio] [Specify Size].
To Next Page
Loading...
