• Press to specify the destination again or select [To], [Cc] or [Bcc].
• You can specify multiple destinations.
• If the target destination does not appear, display the destination by selecting its initial letter
from the title.
• Depending on the security setting, some destinations may not appear in the destination list.
• When the specified destination is updated using the Central Management function, the
spooled documents are sent to the destination after updating.
8. Specify the scan settings according to the purpose of the scanned data.
page 156 "Scanning an Original with Suitable Quality and Density"
page 159 "Specifying the File Type or File Name When Scanning a Document"
9. Press [Start].
Registering the E-mail Destination Specified When Sending an E-mail in the
Address Book
When specifying an e-mail address by entering it manually or selecting it from the scanner records, you
can register the e-mail address in the address book before sending an e-mail.
Scanning Documents and Sending the Scanned Data by E-mail
141
To Next Page
Loading...
