Ricoh IM C8000 - Loading Paper into the A3;11 × 17 Tray Unit

D0CMIC1266
Do not stack paper over the limit mark.
D0CMIC1267
3. Carefully push the paper tray fully in.
4. Specify the paper type and thickness.
page 210 "Specifying Paper Type and Thickness Settings"
• You can load paper even if Tray 1 is in use. It is okay to pull out the left half of the tray while Tray 1
is in use.
Loading Paper into the A3/11 × 17 Tray Unit
(mainly Europe and Asia)
If you attach the A3/11 × 17 tray unit to Tray 1, it will hold A3 paper only. If you want to print on A4
, B4 JIS , 11 × 17 , 8
1
/
2
× 14 , or 8
1
/
2
× 11 , contact your service representative.
(mainly North America)
A3/11 × 17 tray unit can hold 11 × 17 paper only. If you want to print on A3 , A4 , B4 JIS ,
8
1
/
2
× 14 , or 8
1
/
2
× 11 , contact your service representative.
• Check that the paper edges are aligned at the right side.
Loading Paper into the Paper Tray
179