image may not be rotated depending on the settings or types of Finishing, staple or punch, for
example.
• If the size of the original is not detected properly or when you make a copy on paper of a
special size, specify the paper tray in which the paper to use is loaded.
• To prevent the machine from selecting other trays automatically, disable auto tray switching.
See "Tray/Paper Settings", User Guide (Full Version).
6. Press [Start].
• When the [Check the orientation of the original every time after pressing Start] check box is
selected in [Select the original's orientation], the screen below is displayed. Select the original
orientation as necessary. If you do not need to select this each time, clear the check box.
• When you place the original on the ADF, the process of copying the original starts.
• When you place the original on the exposure glass, the copy process starts according to the
setting contents. To make a copy of the second page or back side of the original, place the
original accordingly on the exposure glass, and then press [Start]. Press [Finish Scn] after
scanning all originals if necessary according to the setting contents.
• Originals scanned when no paper is loaded or when an error has occurred will be copied
automatically when the machine is ready to execute copying.
• If you select [Auto Color Select] as the color mode, the machine automatically scans the original
colors. Depending on the scan settings or the content of the original, these colors may not be
scanned correctly. If the colors are not scanned correctly, select the appropriate color mode.
Reserving a Copy Job While Executing Another Copy Job
When [Reserve] is displayed on the execution screen of the current copy job, you can scan the original
of another copy job to execute after the current job is completed (Job Preset).
You can make reservations for up to eight jobs each in the Copier and Document Server functions.
3. Copy
66
To Next Page
Loading...
